Handleiding
Je bekijkt pagina 6 van 70
www.heinner.com
5
Gas hose passageway
Connect the appliance to the gas piping tap in the shortest possible route and in a way that ensures no gas
leakage will occur. To carry on a tightness and sealing safety check ensure that the knobs on the control panel
are closed and the gas cylinder is open.
WARNING: While performing a gas leakage check, never use any kind of lighter, match, cigarette, or similar
burning substance. Apply soap bubbles on the connection points. If there is any kind of leakage, then it will
cause bubbling. While inserting the appliance in place ensure that it is on the same level as the worktop. If
required adjust the legs in order the make level with the worktop. Use the appliance on a level surface and
in a well-ventilated environment.
WARNING: Before placing the appliance, check that the local distribution conditions (gas type and pressure)
conform to the product settings.
Nozzle change operation.
1. Please use a driver with a special head for removing and installing nozzle as. (Figure 3)
2. Please remove the nozzle (figure 4) from the burner with a special nozzle driver and install a new nozzle.
(Figure 5).
Ventilation of room
The air needed for burning is received from the room air and the gases emitted are given directly in room.
For the safe operation of your product, good room ventilation is a precondition. If no window or room to be
utilized for room ventilation is available, additional ventilation should be installed. However, the room has a
door opening outside, it is no needed to vent holes.
Bekijk gratis de handleiding van Heinner HFSC-S50LITGWH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HFSC-S50LITGWH |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 16579 MB |
