Handleiding
Je bekijkt pagina 9 van 39
www.heinner.com
8
Fridge temperature settings
• The initial temperature of the Setting Display is 5°C.
• Press fridge setting button once.
• Every time you press the button, the setting temperature will increase. (2°C, 4°C, 5°C, 6°C,
8°C, super cooling).
• If you press fridge setting button until super cooling symbol is displayed on your fridge
-
Settings Display and you do not press any button within the following 3 seconds
-
Super cooling will blink
• If you keep on pressing, it will restart from last value.
Stand-by mode
How to activate ?
Set “2” set value and push set button until all leds are blink three times.
How it works?
In stand-by mode, all components will be disabled. If user push set button while in stand-by mode,
all leds will blink three times to show stand-by mode is active.
How to deactivate ?
Push and hold set button until display returns to normal working.After the mode is deactivated, the
“Alarm LED” may light on the display because the product may be hot. The “Alarm LED” will turn off
when the product reaches normal temperature.
Temperature settings warnings
• Your appliance is designed to operate in the ambient temperature ranges stated in the standards,
according to the climate class stated in the information label. It is not recommended that your
fridge is operated in the environments which are outside of the stated temperature ranges. This will
reduce the cooling efficiency of the appliance.
• Temperature adjustments should be made according to the frequency of door openings, the
quantity of food kept inside the appliance and the ambient temperature in the location of your
appliance.
• When the appliance is first switched on, allow it to run for 24 hours in order to reach operating
temperature. During this time, do not open the door and do not keep a large quantity of food
inside.
• A 5 minute delay function is applied to prevent damage to the compressor of your appliance
when connecting or disconnecting to mains, or when an energy breakdown occurs. Your appliance
will begin to operate normally after 5 minutes.
Larders (coolers) have not any freezer compartment but can cool up to 4 -6°C.
Climate class and meaning:
T (tropical): This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 43 °C.
ST (subtropical): This refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 °C to 38 °C.
N (temperate): This refrigerating appliance is intended to be used at ambient temperatures ranging
from 16 °C to 32 °C.
SN (extended temperate): This refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 °C to 32 °C.
Door open alarm function
If cooler door is opened more than 2 minutes , appliance sounds ‘beep beep’.
Bekijk gratis de handleiding van Heinner HF-V401NFXE++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HF-V401NFXE++ |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7674 MB |
