Handleiding
Je bekijkt pagina 7 van 39
www.heinner.com
6
Before using your fridge for the first time, please pay attention to the following points:
• The operating voltage for your fridge is 220-240 V at 50Hz.
• The plug must be accessible after installation.
• Your fridge may have an odour when it is operated for the first time. This is normal and the odour
will fade when your fridge starts to cool.
• Before connecting your fridge, ensure that the information on the data plate (voltage and
connected load) matches that of the mains electricity supply. If in doubt, consult a qualified
electrician.
• Insert the plug into a socket with an efficient ground connection. If the socket has no ground
contact or the plug does not match, we recommend you consult a qualified electrician for assistance.
• The appliance must be connected with a properly installed fused socket. The power supply (AC)
and voltage at the operating point must match with the details on the name plate of the appliance
(the name plate is located on the inside left of the appliance).
• We do not accept responsibility for any damages that occur due to ungrounded usage.
• Place your fridge where it will not be exposed to direct sunlight.
• Your fridge must never be used outdoors or exposed to rain.
• Your appliance must be at least 50 cm away from stoves, gas ovens and heater cores, and at least 5
cm away from electrical ovens.
• If your fridge is placed next to a deep freezer, there must be at least 2 cm between them to prevent
humidity forming on the outer surface.
• Do not cover the body or top of fridge with lace. This will affect the performance of your fridge.
• Clearance of at least 150 mm is required at the top of your appliance. Do not place anything on top
of your appliance.
• Do not place heavy items on the appliance.
• Clean the appliance thoroughly before use (see Cleaning and Maintenance).
• Before using your fridge, wipe all parts with a solution of warm water and a teaspoon of sodium
bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge after cleaning.
• Use the adjustable front legs to make sure your appliance is level and stable. You can adjust the
legs by turning them in either direction. This must be done before placing food in the appliance.
• Install the two plastic distance guides (the parts on the black vanes -condenser- at the rear) by
turning it 90° (as shown in the figure) to prevent the condenser from touching the wall.
• The distance between the appliance and back wall must be a maximum of 75 mm.
Before using the appliance
• When using your fridge for the first time, or after transportation, keep it in an upright position for
at least 3 hours before plugging into the mains. This allows efficient operation and prevents damage
to the compressor.
• Your fridge may have a smell when it is operated for the first time. This is normal and the smell will
fade away when your fridge starts to cool.
V. INSTALLATION
Bekijk gratis de handleiding van Heinner HF-V401NFE++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HF-V401NFE++ |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7674 MB |
