Handleiding
Je bekijkt pagina 9 van 45
www.heinner.com
8
• When fitting the filters into the hood pay attention that they are mounted in correct position the handle
facing outwards.
• Close the comfort panel.
REPLACING THE ACTIVATED CHARCOAL FILTER
These filters are not washable and cannot be regenerated and must be replaced approximately every 4
months of operation, or more frequently with heavy usage.
• Remove the metal grease filters
• Remove the saturated activated charcoal filter.
• Fit the new filters.
• Replace the metal grease filters
Light replacement
Replacing the light modules
• Cannot replaced the light bulbs, the entire light module must be replaced.
• When changing the light modules, the contacts are live.
• Before changing the light module(s), unplug the appliance from the mains or switch off the circuit breaker
in the fuse box.
• Remove the grease filter and carefully remove the 2 screws from the front plate (a cross headed
screwdriver will be needed to remove the screws).
• Lower the control panel at the front by carefully pulling it downwards. You can now access the light
module and terminals. Replace the lamp (commercially available LED lamp (max.1.5W).
Bekijk gratis de handleiding van Heinner HDCH-MD800GIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HDCH-MD800GIX |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 9439 MB |
