Handleiding
Je bekijkt pagina 6 van 45
www.heinner.com
5
5. INSTALLATION
WALL DRILLING AND BRACKET FIXING
As a first step, proceed with the following drawings:
A veritcal line up to the ceiling or up to the upper limit, at the center of the area in which the hood is to be
fitted.
The cooker hood should be placed 650-750 mm (horizontal line A) up from the cooking plane for safe and a
good effect.
A horizontal line B at a minimum 960-1060
A horizontal line C at a X mm above the B.
A horizontal line D at Y mm above the cooker hood. (optional: Install Upper Chimney)
Mark Points:
Mark a point (1) on the horizontal line D, 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
Mark a point (2) on the horizontal line C, 60 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
Mark a point (3) on the horizontal line B, 80 mm to the vertical reference line.
Repeat this operation on the other side, checking that the three marks are leveled.
Fix the brackets:
Drill holes at the marked points with a ɸ10 mm drill bit.
Insert the Wall Plugs 11 into the holes.
Fix the hood fixing bracket 20 with 3 screws 10 (ST5x50) supplied with the hood at the horizontal line B.
Chimney fixing bracket 21 with 2 screws 10 (ST5x50) supplied with the hood at the horizontal line D.
Bekijk gratis de handleiding van Heinner HDCH-MD650GIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HDCH-MD650GIX |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 9364 MB |
