Handleiding
Je bekijkt pagina 10 van 51
www.heinner.com
9
REPLACING THE ACTIVATED CHARCOAL FILTER
These filters are not washable and cannot be regenerated and must be replaced approximately every 4
months of operation, or more frequently with heavy usage.
• Remove the metal grease filters
• Remove the saturated activated charcoal filter.
• Fit the new filters.
• Replace the metal grease filters
Light replacement
Replacing the light modules
• Cannot replaced the light bulbs, the entire light module must be replaced.
• When changing the light modules, the contacts are live.
• Before changing the light module(s), unplug the appliance from the mains or switch off the circuit breaker
in the fuse box.
• Remove the grease filter and carefully remove the 2 screws from the front plate (a cross headed
screwdriver will be needed to remove the screws).
• Disconnect the terminal of LED light.
• Press LED light on the back of the front plate, take the LED light out.
• Replace the lamp (commercially available LED lamp).
Max power
Voltage
Picture
ILCOS D code
Separate ballasted
LED modules
1.5 W
DC 12
V
Round/Diameter: 70 mm
DSR-1.5-S-70
Separated-
ballasted LED
modules
1.5 W
DC 12
V
Square/Diameter: 33.2mm x
120mm
DBS-1.5-S-33.2/120
Self-ballasted LED
modules
1.5 W
220V-
240V~
Square/Diameter: 33.2mm x
120mm
DBS-1.5-H-33.2/120
Bekijk gratis de handleiding van Heinner HDCH-MD620RGBK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HDCH-MD620RGBK |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 10967 MB |
