Handleiding
Je bekijkt pagina 5 van 49
www.heinner.com
4
Adequate air circulation should be around the appliance, lacking this leads to overheating. To achieve
sufficient ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be too close to a wall to avoid touching or catching
warm parts (compressor, condenser) to prevent the risk of a fire, follow the instructions relevant to
installation.
The appliance must not be locate close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the appliance.
This refrigerating appliance is not intend to be used as a built-in appliance.
Important! It is necessary to have good ventilation around the freezer to allow for the dissipation of heat,
high efficiency, and low power consumption. For this reason, sufficiently cleared space should be available
around the freezer. It is advisable for there to be 75 mm separating the back of the freezer to the wall and at
least 100mm of space on its two sides, a height of over 100 mm from its top.
Appliances must not be exposed to rain. Sufficient air must be allowed to circulate in the lower rear section
of the appliance, as poor air cisculation can affect performance. Built-in appliances should be positioned
away from heat sources such as heaters and direct sunlight.
Install this appliance at a location where the ambient temperature corresponds to the climate class indicated
on the rating plate of the appliance:
For refrigerating appliances with climate class:
• extended temperate: this refrigerating appliance is intended to be used at ambient temperatures
ranging from 10 °C to 32 °C (SN);
• temperate: this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 32 °C (N);
• subtropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 38 °C (ST);
• tropical: this refrigerating appliance is intended to be used at ambient temperatures ranging from
16 °C to 43 °C (T);
Leveling
The appliance should be level in order to eliminate vibration. To make the appliance level, it should be upright
and both adjusters should be in stable contact with the floor. You can laso adjust th elevel by unscrewing the
appropiate level adjusment in the front (use your fingers or a suitable spanner).
Bekijk gratis de handleiding van Heinner HCF-HS420E++, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HCF-HS420E++ |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 9333 MB |
