Handleiding
Je bekijkt pagina 16 van 45
www.heinner.com 550W, 50Hz, 220-240V
15
V. BEFORE USING
Before initial use
1. Before first use, unpack the appliance and place all parts on a horizontal surface.
2. The jar assembly (including the measure cup, lid, seal ring 1, jar, seal ring 2 , blade
assembly and jar base) has already been assembled into the motor unit. Disassemble to
wash all detachable parts except the motor unit. Refer to the latter chapter CARE AND
CLEANING.
3. Once all pieces have been cleaned and dry thoroughly, reassemble.
1) Invert the jar onto a level surface, place the seal ring 2 and blade assembly onto the jar
（See Fig.3）.
2) Holding the jar handle, put the jar base onto the jar bottom and secure the jar base by
turning it clockwise until tight（See Fig.4）
3) Reposition the jar assembly with its opening upwards. Wrap the seal ring 1 around the
lid bottom and put the lid onto the jar assembly. Place the measure cup exactly into the lid
by fitting the small projection on the both sides of the cup into the slots of the lid and
turning the cup clockwise until tight.（See Fig.5）
4. Finally, place the assembled jar onto the motor unit by aligning the strip on the
assembled jar bottom. (See Fig.6）
CAUSION: Jar is now secure. Do not try to twist the jar onto motor unit
Bekijk gratis de handleiding van Heinner HBL-550S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBL-550S |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 8747 MB |
