Handleiding
Je bekijkt pagina 17 van 88
www.heinner.com
16
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person.
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given on the rating plate.
3. The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices, as
they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its temperature will
not exceed 75°C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations.
Any alterations must only be made by a qualified electrician.
• If the cable is damaged or needs to be replaced, the operation must be carried out by an after-sale agent
with dedicated tools to avoid any accidents.
• If the appliance is connected directly to the mains an omni polar circuit-breaker must be installed with a
minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and that it is compliant
with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly and replaced by authorized technicians
The bottom surface and the power cord of the hob are not accessible after installation.
Bekijk gratis de handleiding van Heinner HBHI-M2ZB1FXTC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBHI-M2ZB1FXTC |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 15965 MB |
