Handleiding
Je bekijkt pagina 12 van 65
www.heinner.com
11
• The panels located above the work surface, directly next to the appliance, must be made of non-
flammable material. Both the stratified surfacing and the glue used to secure it should be heat
resistant, to prevent deterioration.
• Turn on appliance tap and light each burner. Check for a clear blue flame without yellow tipping.
• If burners show any abnormalities check the following:
- Burner lid on correctly
- Flame spreader positioned correctly.
- Burner vertically aligned with injector nipple.
• A full operational test and a test for possible leakages must be carried out by the fitter after
installation.
• The flexible hose shall be fitted in such a way that it cannot come into contact with a moveable part of
the housing unit and does not pass through any space susceptible of becoming congested.
• Grease cranes produced at the factory to meet the requirement of all life hob.
6. CLEANING AND MAINTENANCE
• Never use abrasive or caustic cleaning agents.
• This appliance should only be repaired or serviced by an authorised Service Engineer and only genuine
approved spare parts should be used.
• Before attempting to clean the appliance, it should be disconnected from the mains and cooled.
• You should not use a steam jet or any other high pressure cleaning equipment to clean the appliance.
• Cleaning operations must only be carried out when the appliance is completely cool.
• The appliance should be disconnected from your mains supply before commencing any cleaning
process. Clean the appliance regularly, preferably after each use.
• You should clean it using water and a little washing up liquid.
Pan support and control handles
• Take off the Pan support.
• Clean these and the control handles with a damp cloth, washing up liquid and warm water. For
stubborn soiling, soak beforehand.
• Dry everything with a clean, soft cloth.
Top plate
• Regularly wipe over the top plate using a soft cloth well wrung-out in warm water to which a little
washing up liquid has been added.
• Dry the top plate thoroughly after cleaning.
• Thoroughly remove salty foods or liquids from the hob as soon as possible to avoid the risk of
corrosion.
• Stainless steel parts of the appliance may become discoloured over time. This is normal because of the
high temperatures. Each time the appliance is used these parts should be cleaned with a product that is
suitable for stainless steel.
Bekijk gratis de handleiding van Heinner HBH-M705IWFIX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Heinner |
| Model | HBH-M705IWFIX |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 14034 MB |
