Hazet 9580-10 handleiding
Handleiding
Je bekijkt pagina 18 van 166
18
[
+49 (0) 21 91 / 7 92-0 •
^
hazet.de •
]
info@hazet.de
9580-10
18
Tuning (DAB)
Whenthedeviceisfirs switchedoninDAB
mode,theradiowillautoscantofin broadcast
stations in the local area.
Briefl pressthe
or button (10a or 10b)
to scroll through the stations. Press
button
to select.
Finding new stations (DAB) (FIG. M)
From time to time, new DAB radio stations may
become available. Or you may have moved to a
differen partofthecountry.Inthiscaseyoumay
need to activate your radio to scan for new stations.
press the
button. Your radio will perform
a full scan of the DAB frequencies. As new
stations are found, the station counter on the
left side in the display will increase and stations
will be added to the list.
Manual tuning(FM):
Briefl pressthe
or
button to set the desired frequency. Each
press will increase or decrease 0.05MHZ. The
frequency is shown in the display.
Scan Tuning (FM):
Press the
or
button and hold for 3 seconds, the tuner
frequencywillincreasetoseekthefirs radio
station with acceptable clarity and stop at
that station. The frequency is shown in the
display. The right arrow button may be pressed
again to continue seeking a radio station at
higher frequencies. The left arrow button may
be pressed to seek radio stations at lower
frequencies. The search function is only
available in FM mode.
Storing stations in preset memories
(DAB and FM) (FIG. N)
There are 5 memory presets for each
waveband.
Press and hold the desired Preset button (15) until
the preset number is shown on the display. The
station is then stored in the selected Preset button.
Repeat this procedure for the remaining presets.
Stations stored in the preset memories can
be overwritten by following the procedures
described above.
To recall stations from the preset memories,
briefl pressthedesiredPresetbuttonwhile
device is in radio mode. The preset number
and station frequency will appear in the display.
System reset (FIG. O)
Press the Clock button and hold on for 10
seconds, press
button to enter into the
factory reset function interface. Then press
button to select ‘Yes’ and press
button
to start the reset process. All stored data in
the device will be cleared and restored to the
original settings.
Maintenance and care
WARNING!
Before carrying out work of any kind (cleaning,
transport, storage), remove the battery from the
device.
CAUTION!
Never clean plastic parts with solvents or other
aggressivefluids Thiscoulddamagethe
device.
Cleaning
Clean the device with a dry cloth or brush.
Repairs
Repairs must be carried out by an authorized
customer service centre only.
Spare parts and accessories
Other accessories can be found in the
manufacturer’scatalogues.Youcanfind
exploded drawings and spare part lists on our
homepage:
www.hazet.de
EU countries only
Do not throw electric power tools into
the household waste! In accordance
with the European Directive 2012/19/
EU on Waste Electrical and Electronic
Equipment and transposition into
national law used electric power tools
must be collected separately and
recycled in an environmentally friendly
manner.
Raw material recovery instead of waste
disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner.Plasticpartsareidentifie forrecycling
according to material type.
Bekijk gratis de handleiding van Hazet 9580-10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9580-10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23382 MB |
