Hazet 9512-950 handleiding
Handleiding
Je bekijkt pagina 19 van 190
19
[
+49 (0) 21 91 / 7 92-0 •
^
hazet.de •
]
info@hazet.de
of the bolt head or nut is fully engaged into
socket.
■
Depress the variable-speed trigger switch
to turn the impact wrench on. Once the
fastener is loose, the tool will stop running.
This tool also allows you to continue to
depress the trigger switch for removing the
nut from the long bolt, if necessary.
Maintenance and care
WARNING!
Remove the battery before carrying out any
work on the power tool.
Cleaning
■
Clean the power tool and grille in front
of the vent slots regularly. Frequency of
cleaning is dependent on the material and
duration of use.
■
Regularly blow out the housing interior and
motor with dry compressed air.
Spare parts and accessories
For other accessories, in particular tools
and polishing aids, see the manufacturer’s
catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.hazet.de
Disposal information
WARNING!
Render redundant power tools unusable:
mains operated power tool by removing
the power cord,
battery operated power tool by removing
the battery.
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of
waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identied for
recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, re or water. Do not open used
batteries.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal
options!
-Declaration of conformity
We declare on our sole responsibility
that the product described in “Technical
specications”conforms to the following
standards or normative documents:
EN 62841 in accordance with the regulations
of the directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
of the bolt head or nut is fully engaged into
socket.
■
Depress the variable-speed trigger switch
to turn the impact wrench on. Once the
fastener is loose, the tool will stop running.
This tool also allows you to continue to
depress the trigger switch for removing the
nut from the long bolt, if necessary.
Maintenance and care
WARNING!
Remove the battery before carrying out any
work on the power tool.
Cleaning
■
Clean the power tool and grille in front
of the vent slots regularly. Frequency of
cleaning is dependent on the material and
duration of use.
■
Regularly blow out the housing interior and
motor with dry compressed air.
Spare parts and accessories
For other accessories, in particular tools
and polishing aids, see the manufacturer’s
catalogues.
Exploded drawings and spare-part lists can
be found on our homepage:
www.hazet.de
Disposal information
WARNING!
Render redundant power tools unusable:
mains operated power tool by removing
the power cord,
battery operated power tool by removing
the battery.
EU countries only
Do not throw electric power tools into
the household waste!
In accordance with the European Directive
2012/19/EU on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
Raw material recovery instead of
waste disposal.
Device, accessories and packaging should
be recycled in an environmentally friendly
manner. Plastic parts are identied for
recycling according to material type.
WARNING!
Do not throw batteries into the household
waste, re or water. Do not open used
batteries.
EU countries only:
In accordance with Directive 2006/66/EC
defective or used batteries must be recycled.
NOTE
Please ask your dealer about disposal
options!
-Declaration of conformity
We declare on our sole responsibility
that the product described in “Technical
specications”conforms to the following
standards or normative documents:
EN 62841 in accordance with the regulations
of the directives 2014/30/EU, 2006/42/EC,
2011/65/EU.
Responsible for technical documents:
Responsible for technical documents:
HAZET-WERK
Hermann Zerver GmbH & Co. KG,
Güldenwerther Bahnhofstraße 25 - 29
42857 Remscheid GERMANY
i.V. Volker Grünberg
Head of Quality Department (QD)
01.03.2025;
HAZET-WERK
Hermann Zerver GmbH & Co. KG,
Güldenwerther Bahnhofstraße 25 - 29
42857 Remscheid GERMANY
i.V. Volker Grünberg
Head of Quality Department (QD)
Hermann Zerver GmbH & Co. KG,
Bekijk gratis de handleiding van Hazet 9512-950, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9512-950 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28905 MB |
