Hazet 9512-600 handleiding
Handleiding
Je bekijkt pagina 16 van 192
16
[
+49 (0) 21 91 / 7 92-0 •
^
hazet.de •
]
info@hazet.de
16
“A” is a special mode, that is designed to be
used both with forward rotation for tightening
the bolts or nuts and reverse rotation for
loosening the bolts or nuts.
■
Forward: bolt auto stop mode; the tool
stops after applying a number of impacts to
avoid fasten too tightly.
■
Reverse: bolt removal mode; the tool stops
automatically as soon as it has loosened
the bolt/nut.
The “
” mode is intended for driving screws in
wood.
Using the “M” button:
Press the “M” button directly without touching
the trigger switch. The corresponding
indicator light will illuminate to indicate the
active mode. Press the “M” button briefly (less
than 0.5 seconds) to cycle between “A” and
“
” modes. Each press changes one mode.
See more details in the chart below:
Forward Rotation:
Indicator light on control
panel
Working
Mode
Maximum IPM
(Impacts per minute)
Application
1 1000
Fine-tuned tightening of small
bolts and nuts.
2 2700 Moderate tightening torque.
3 3750 Maximum tightening torque.
A /
Tightening with automatic
stop.
/
Greatly increase the screwing
speed while driving screws in
wood.
Bekijk gratis de handleiding van Hazet 9512-600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9512-600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28881 MB |
