Hazet 9033-11/17 handleiding
Handleiding
Je bekijkt pagina 13 van 28
13
Wear hearing protection!
3. Dangers that may arise
from the tool
Before each use, check the HAZET
tool for full
functionality. Do not use the tool if its functio-
nal efficiency cannot be ensured or if damage
is detected. If it is determined that the tool is
not in good working order but the tool is used
in spite of this, there is a danger of serious
damage to body, health and property.
• Do not use tools with a defective on/off
switch. Any tools that cannot be switched on
or off with the On/Off switch are dangerous
and must be repaired immediately.
• All service or repair work must be carried out
by qualified personnel only. Only use original
spare parts in order to guarantee its long
term operational safety.
• Do not remove safety tools / guards and/or
housing parts.
•
Never operate the tool if a protective cover is
missing or if one or more of the safety tools /
guards are not fitted and in perfect conditi
-
on.
• For safety reasons any modification of
HAZET tools is strictly forbidden. Any modi
-
fication of the tool will result in immediate
exclusion from express or implied warranty
and liability.
• Wear working gloves and
safety glasses.
Pneumatic tools can disper
-
se chips, dust and other
abraded particles at high
speed which may result
in severe eye injuries.
Compressed air is dan
-
gerous. The air flow may
cause harm to sensitive parts
of the body such as eyes,
ears, etc. Dust and objects
being raised by the air flow
may cause injuries.
• Wear hearing protection. Prolonged expo
-
sure to the working noise of
pneumatic tools may result
in permanent hearing loss.
• Wear a face mask or brea
-
thing protection. Breathing
in the vapour of some mate
-
rials such as adhesives and
tar that contain dangerous
chemicals can, over a longer
period of time, cause serious
harm to the lungs and respi
-
ratory tracts.
• Wear tight-fitting protective clothing.
Tools with moving parts can get caught in
your hair, clothes, jewellery,
or other loose objects, which
can lead to serious injury.
Never wear clothing that is
too loose and/or clothing
with bands or loops, etc.
which may get caught in the moving parts
of the tool. During work, take off jewellery,
watches, identification tags, bracelets, neck
-
laces etc. that could get caught in the tool.
Never touch the moving parts of a tool. Long
hair should be tied back or covered.
• Keep children away from pneumatic tools.
Unattended tools or tools that are connected
to the compressed air supply may be used
by non-authorised persons and could injure
them or other persons.
2
For Your Safety
Bekijk gratis de handleiding van Hazet 9033-11/17, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hazet |
| Model | 9033-11/17 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5214 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 540 g |
| Breedte | 112.1 mm |
| Diepte | 45 mm |
| Hoogte | 152 mm |
