Hayter RANGER 48 PUSH handleiding
Handleiding
Je bekijkt pagina 25 van 45
1.231.23
WARNING - PREVENT ACCIDENTS: Drain fuel by running the engine until the fuel
tank is empty and the engine stops before attempting to tip the mower for oil draining
purposes.
OIL SERVICE
CS034
STOP
1
2
3
- Check the oil level every 5 hours or daily and ensure that the correct oil level is main-
tained. Refer to -‘Before Starting the Engine Oil Recommendations’ for oil checking
procedure and filling instructions.
- Drain the engine oil after the first 5 hours of operation and thereafter at the end of
every grass cutting season.
- Change the oil while the engine is warm. Refill with fresh clean oil of the recommended
SAE viscosity grade. Refer to - ‘Before Starting the Engine: Oil Recommendations’.
- Remove the spark plug lead and allow the engine to cool.
Tip the mower over on to its left hand side thus ensuring
that the air cleaner is kept uppermost to prevent engine
damage. Remove the oil filler dipstick and drain the oil into
a suitable container.
1. Engine
2. Spark Plug Lead
3. Spark plug
MAINTENANCE
Refer to the Maintenance Schedule at the end of this section and ensure that the recommen-
dations are followed. More frequent service is required when operating in adverse conditions.
397011MA260599A
Bekijk gratis de handleiding van Hayter RANGER 48 PUSH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hayter |
| Model | RANGER 48 PUSH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4503 MB |
