Haws 3602 handleiding
Handleiding
Je bekijkt pagina 2 van 12
07/22 Models 3602/3602F Page 2 of 12
RECOMMENDED TOOLS:
- Measuring Tape
- PVC Pipe Cutter
- Plastic Tubing Cutter
- PVC Solvent Weld Glue
- ¼” Bit-Holding Screwdriver
- Level
- 10” Pipe Wrench
- Adjustable Plier
- 1/8 and 5/32 Tamper Resistant Hex Bits (Supplied)
- 9/16” and 5/8” Box/Open Combination Wrenches, 8” Max Length
- 3/8” Socket Wrench/Rachet, 8” Max Length
- 9/16” Deep Socket
- 15/16” Socket
LOCATION OF UNIT: The Model 3602/3602F (with Filter) Fountain can be installed and
assembled to be ADA accessible by first locating the pedestal base on a hardscape with
dimensions that comply with your local, state, and federal codes regarding clear floor space
and pedestrian protection area. Refer to the last page of this document for more information.
When the right pedestal arm is installed in the high orientation, the height dimensions shown
on the model specification sheet meet current Federal Americans with Disabilities Act (ADA)
wheelchair requirements. When a fountain is installed on top of the pedestal, the height
dimensions shown on the model specification sheet meet current ADA standing height
requirements. When installing this unit, local, state and federal (including ADA) codes must be
adhered to. If height other than shown is required, then dimensions must be adjusted
accordingly.
ATTENTION: For model 3602F (model with Filter), the Operating Temperature Range for the
6477 Filter Kit Assembly (Required - supplied separately) is 40° F - 100° F (4.4° C – 37.8° C).
SUPPLY LINE: Model 3602 – The minimum recommended line size is 1/2“IPS with 30-90 psi
(2-6 ATM) flowing pressure. Where sediment or mineral content is a problem, an inlet filter is
recommended. Model 3602F (with Filter) – The minimum recommended line size is 1/2“IPS
with 40-90 psi (2.76-6 ATM) flowing pressure.
PLUMBING CONNECTIONS: Model 3602 – Water supply inlet connection is a 3/8“O.D.
compression fitting. Waste outlet is 1-1/2” PVC pipe. Model 3602F – Water supply inlet and
outlet connection (for Filter) is a 3/8“O.D. push-in type fitting. Waste outlet is 1-1/2” PVC pipe.
Plumbing connections will vary depending on how each model is configured during assembly.
Please consult the installation drawings below for supply and waste fitting arrangements and
assembly for your specific model.
MAINTENANCE: Models 3602 & 3602F Periodically clean the pushbutton valve strainer.
Refer to 5874 Series Valve Operation and Maintenance Manual for more information. Model
3602F – Filter replacement to occur at 1 year maximum or 3,000 gallons maximum, whichever
comes first. Replace filter per Filter Replacement instructions listed on model 6477 Operation
& Maintenance Manual.
Bekijk gratis de handleiding van Haws 3602, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haws |
| Model | 3602 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1511 MB |
