Hasselblad 500 Classic handleiding
Handleiding
Je bekijkt pagina 36 van 42
Removing the Winding Crank
Push the catch lever downwards while rotating the
crank counter-clockwise. Then pull the crank straight
out from the shaft.
Attaching the Winding Crank
Attach the crank to the shaft, aligning the smaller tri-
angularindexmarkagainstthereddotjustabovethe
mount. Keep the crank pushed against the camera
while turning it clockwise until the larger triangular
mark is aligned with the red dot.
Winding Crank
The 503CXi is equipped with an upgraded winding
crank to enable the use of the Winder CW.
The winding crank of 503CX and earlier cameras is at-
tached and removed as described on page 10.
Bekijk gratis de handleiding van Hasselblad 500 Classic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hasselblad |
| Model | 500 Classic |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10097 MB |
