Hasselblad 500 Classic handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 25 van 42
PMEandPME3/PMESMeterPrismViewnd-
er Adjustments
Since the Hasselblad Meter Prism Viewnders measure
the light level on the focusing screen they have been cal-
ibrated at the factory to give an accurate reading with
one particular type of screen. If that focusing screen is
replaced with another type which gives a dierent light
level under the same ambient conditions, the meter has to
beadjustedtocompensateforthedierence.
ThePMEandPME3/PME5meterviewndersarebasi-
callythesamedesignbutaredierentlyadjustedfromthe
factory.ThePME3/PME5typeisadjustedtothebright-
er Acute-Matte screen in the 503CX or CXi camera while
thepreviousPMEtypeisadjustedtothelowerlightlevel
of the Ground glass screen (Cat. No. 42161) and similar,
comparable screens, such as Split image (42188), Micro-
prism and split image (42218) , or Grid and microprism
(42250) which is used in the 500 Classic. The Plain glass
screen (42200) is not suitable for TTL metering.
Thedistinctionbetweenthetwoviewndertypesisindi-
cated by the designation PME3 or PME5 respectively on
therearofthe viewnderbodyabovetheeyepiece.The
PM E has no designation.
The ways of compensating for alternative usage of the
meter viewnders are shown in the charts on the next
page .

Bekijk gratis de handleiding van Hasselblad 500 Classic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHasselblad
Model500 Classic
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10097 MB