Hasselblad 500 Classic handleiding

42 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 42
Attaching the Magazine
Ensure that the magazine slide is fully inserted, and
thattheindicatorsarewhite:lftheindicatorsarenot
white, then refer to the instruction on page 9.
Rest the magazine on the camera’s lower support
hooks and make sure that it is properly located on
them . Carefully swing the magazine towards the cam-
era body and check that the camera’s upper support
hookstintotheslotsinthemagazine.Pushthemag-
azinegentlybutrmlyagainstthehookswhilesliding
the magazine catch button to the right. Release the
button when the magazine has made contact with the
rear plate of the camera, and push it to the left to en-
sure that it has reached the locked position . Remove
the magazine slide and the camera is ready to use.
Removing the Magazine
It is advisable to have the camera cocked (fully wound)
and the magazine and camera indicators both display-
ing white. If the magazine indicator shows a red signal
then follow the instructions on the next page.
Insert the magazine slide into the magazine with the
hinge towards the front of the camera.
Slide the magazine catch to the right, swing the maga-
zinebackandliftitothelowersupports
NOTE: The magazine cannot be removed without
inserting the magazine slide. The slide protects the
lmfromfogging.Notealsothatthecameracannot
be operated when a magazine, with slide inserted, is
attached to the camera.

Bekijk gratis de handleiding van Hasselblad 500 Classic, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHasselblad
Model500 Classic
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10097 MB