Harper XP800 handleiding
Handleiding
Je bekijkt pagina 16 van 34
1. Remove the waste from the dust receptacle (see “Removing waste from the dust
receptacle”).
Open
Close
A B C D
Figure 12 Removing the filter
2. Turn the first filter from the dust container. (A)
3. Turn the second filter from the dust container. (B)
4. Turn the third filter from the vacuum cleaner. (C)
5. Rinse all filters thoroughly in lukewarm water. (D)
6. Allow the filters to dry thoroughly.
7. Mount the holders and filters in the reverse sequence.
Attention The filter fits only one way in the holder. The arrow must be at the side of
the handle. (See figure 12 A)
If necessary, replace the filter.
PLEASE NOTE
• Water could penetrate into the appliance if the filter is not thoroughly dry. This
could result in (electrical) damage.
• Do not clean the filter in a washing machine.
• Do not dry the filter with a hairdryer.
Cleaning of replacing the exhaust filter
Replace the exhaust filter at least twice a year, and more frequently if the filter isvisibly
blocked.
1. Remove the plug from the wall socket.
Figure 13 Removing the exhaust filter
Bekijk gratis de handleiding van Harper XP800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Harper |
| Model | XP800 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 2990 MB |