Hanwha XNV-6123R handleiding
Handleiding
Je bekijkt pagina 22 van 39
22_ bullet camera
bullet camera
Installing the camera module
1. Hang the safety wire on the hook inside the bottom cover.
e.g.
2. Connect the network/power/audio/alarm cables to the camera module terminal.
3. Join the camera body with the Bottom cover.
J
`
Make sure to firmly tighten the fastening screws so that there is no water damage issue.
x4
3x
TR20
4. Adjust the camera direction using the Torx. wrench.
J
`
When you adjust the camera position using a bracket, please loosen the bracket screw, adjust the camera, and tighten it. If
you attempt to adjust it forcibly while the screw is tight, it may result in a scratch or other problems.
TR20
Bekijk gratis de handleiding van Hanwha XNV-6123R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | XNV-6123R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5786 MB |
