Hanwha XNP-C9310R handleiding
Handleiding
Je bekijkt pagina 18 van 33
installation & connection
18_ installation & connection
3. Remove the cable bushing from the bushing cover.
4. Pull off the extruded part of the removed cable bushing.
5. Use the cap installer to route the network cable through the cable bushing.
M
`
If the cable bushing is torn, use the extra cable bushing provided.
6. For waterproof protection, pull down the cable below the cable bushing as shown in the figure below.
9~10 cm
7. Insert the cable bushing, threaded with the network cable, into the hole on the bushing cover.
When plugging it in, press the whole bushing area evenly so that it is properly plugged in.
Bekijk gratis de handleiding van Hanwha XNP-C9310R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | XNP-C9310R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4219 MB |
