Hanwha XNP-C9310R handleiding
Handleiding
Je bekijkt pagina 13 van 33
English _13
! OVERVIEW
3. Insert Micro SD cards in the direction of the arrows as shown in the figure.
J
`
Do not forcefully insert it in the reverse direction. It might damage your Micro SD card and your product.
4. Close the micro SD card slot cover, then fasten it using the Torx screwdriver.
J
`
Make sure to tighten the screw firmly when assembling the micro SD card slot cover to ensure it’s watertight.
Removing a Micro SD card
Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD
card from the slot.
J
`
Before removing the Micro SD card, in <Setup ( )>-<Event>-<Storage>, set the device to <Off> and press the [Apply]
button and turn the camera off.
`
If you turn off the camera or remove the Micro SD card that contains data from the product, the data may be lost or damaged.
Preparing & Installing Camera Mount
For installation guidelines for mounts, refer to the installation manual that is enclosed with the mount.
M
`
See “Optional Accessories for Installation” for the appearance of each mount (unbundled). (page 8)
Bekijk gratis de handleiding van Hanwha XNP-C9310R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | XNP-C9310R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4219 MB |
