Hanwha XNP-C9310R handleiding
Handleiding
Je bekijkt pagina 10 van 33
overview
10_ overview
AT A GLANCE
Appearance
Item Description
a
Main cover Protects the internal PTZ mechanism from the direct sunlight, rain or external impact.
b
Dome cover Shield cover for the lens and unit protection.
c
Micro SD Card cover
The Micro SD card slot and reset button are located inside and can be opened using Torx
drivers, etc.
Inside
Item Description
a
IR LED These infrared LED’s are controlled by the illumination sensor.
b
Lens Lens for the camera.
c
Illumination Sensor Detects incoming light to control the IR LED.
d
Reset button
The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.
J
If you reset the camera, the network settings will be adjusted so that DHCP can be
enabled. If there is no DHCP server in the network, you must run the Device Manager
program to change the basic network settings such as IP address, Subnet mask,
Gateway, etc., before you can connect to the network.
e
Micro SD Card slot Compartment for the Micro SD card.
a
b
c
e
c
b
d
a
Bekijk gratis de handleiding van Hanwha XNP-C9310R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanwha |
| Model | XNP-C9310R |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4219 MB |
