Hanwha HCF-8011RV handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 29 van 32
English_29
CAMERA OPERATION
y
DAY/NIGHT: You can display pictures in color or in black and white.
Select <DAY/NIGHT>.
Select the desired mode.
-
AUTO : Switch to color mode
during the daytime and
b/w at night or in low light.
y BURST : Activate or deactivate
the burst mode to
maintain or remove the
color signal.
y DURATION : This function is used to select the brightness of light where
switching occurs.
y DWELL TIME : You can select day/night switching delay time from.
3s, 5s, 7s, 10s, 15s, 20s, 30s, 40s, 60s
M
` If you set the AGC mode to off on the exposure menu, you cannot switch the day/night
mode to auto.
` When a bright light source is in the screen or there are frequent brightness changes, if
you use the auto night/day mode, and set the switching time to short (3, 5 sec), a hunting
can be caused. In this situation, it is recommended to use the default setting (30 sec).
-
COLOR : The picture is always displayed in color.
-
B/W : The picture is always displayed in black and white.
You can turn on or off the burst signal on B/W mode.
y
IR MODE : When IR LED is turned on in the B/W mode, the saturation at the
center of the screen will be prevented depending on the set screen
size so that the camera can identify a subject even at a close distance.
-
RETURN : Return to the SPECIAL menu.
DAY/NIGHT
1.
BURST
ON
2.
DURATION
NORMAL
3.
DWELL TIME
3 SEC
4.
RETURN

Bekijk gratis de handleiding van Hanwha HCF-8011RV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkHanwha
ModelHCF-8011RV
CategorieBewakingscamera
TaalNederlands
Grootte2615 MB