Hansgrohe Ecostat Comfort 13114340 handleiding

Niet gecategoriseerd

Hansgrohe

40 pagina's

PDF beschikbaar

Handleiding

Fault Cause Remedy

Insuﬃcient water - Supply pressure inadequate - Check water pressure (If a pump has been installed

check to see if the pump is working).

- Regulator ﬁlter dirty - Clean ﬁlter in front of the mixer and on the MTC-ther-

mo cartridge

- Shower ﬁlter seal dirty - Clean ﬁlter seal between shower and hose

Crossﬂow, hot water being forced into cold water pipe,

or vice versa, when mixer is closed

- Backﬂow preventers dirty or leaking - Clean backﬂow preventers, exchange if necessary

Spout temperature does not correspond with tempera-

ture set

- Thermostat has not been adjusted - Adjust thermostat

- Hot water temperature too low - Increase hot water temperature to 42 °C to 60 °C

Temperature regulation not possible - thermo cartridge calciﬁed - Exchange thermo cartridge

- Hot and cold supplies are reversed - Control unit for reversed connections #92373000

Instantaneous heater didn't work with thermostat - Filters are dirty - Clean the ﬁlter / exchange ﬁlter

- check valve hasn't moved back - Exchange check valves

- Flow limiter in handshower isn’t removed - Remove ﬂow limiter

- Shower ﬁlter seal dirty - Clean ﬁlter seal between shower and hose

Shower or spout dripping - Dirt or sedimentation on valve seat, shut-oﬀ unit

damaged

- Clean or exchange shut-oﬀ unit

English

Assembly (see page 33)

Safety Notes

!

Gloves should be worn during installation to prevent crushing and cutting

injuries.

!

The product may only be used for bathing, hygienic and body cleaning

purposes.

!

Children as well as adults with physical, mental and/or sensoric impairments

must not use this product without proper supervision. Persons under the inﬂuence

of alcohol or drugs are prohibited from using this product.

!

The hot and cold supplies must be of equal pressures.

Installation Instructions

• Prior to installation, inspect the product for transport damages. After it has been

installed, no transport or surface damage will be honoured.

• The pipes and the ﬁxture must be installed, ﬂushed and tested as per the

applicable standards.

• The plumbing codes applicable in the respective countries must be observed.

• The product is not designed to be used with steam baths!

• If the continuous water heater causes any problems, or you have diﬀerent water

pressures you must install a water limiter to the cold supply, (ordered separate-

ly,article number 97510000).

Technical Data

Operating pressure: max. 1 MPa

Recommended operating pressure: 0,1 - 0,5 MPa

Test pressure: 1,6 MPa

(1 MPa = 10 bar = 147 PSI)

Hot water temperature: max. 60°C

Centre distance: 150±12 mm

Connections G 1/2: cold right - hot left

Thermal disinfection: 70°C / 4 min

• Safety against backﬂow

• The product is exclusively designed for drinking water!

Symbol description

Do not use silicone containing acetic acid!

Safety Function (see page 34)

The desired maximum temperature for example max. 42°C can be pre-set thanks to

the safety function.

Adjustment (see page 33)

After the installation, the output temperature of the thermostat must be checked. A

correction is necessary if the temperature measured at the output diﬀers from the

temperature set on the thermostat.

Maintenance (see page 37)

• The check valves must be checked regularly according to EN 806-5 in accord-

ance with national or regional regulations (at least once a year).

• To guarantee the smooth running of the thermostat, it is necessary from time to

time to turn the thermostat from total hot to total cold.

Dimensions (see page 36)

Flow diagram (see page 37)

Shower outlet

Tub outlet

Spare parts (see page 40)

XX = Colors

00 = Chrome Plated

14 = Brushed Bronze

34 = Brushed Black Chrome

67 = Matt Black

70 = Matt White

80 = Stainless Steel Optic

99 = Polished Gold-Optic

Cleaning (see page 35)

Operation (see page 35)

Test certiﬁcate (see page 37)

Special information for UK (see page 38)

Bekijk gratis de handleiding van Hansgrohe Ecostat Comfort 13114340, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.