Hanseatic HWMM5714A3 handleiding
Handleiding
Je bekijkt pagina 73 van 92
Standard cycles Page EN-27
Standard cycles
Before getting started
– Read the “Intended use” and “Safety in-
structions” chapters first.
– Remove the transport safety devices
and prepare the appliance as described
in the chapter “Set-up, connection and
initial start-up”.
– Fit the water inlet hose (28) and the wa-
ter outlet hose (17) correctly.
– Open the tap completely.
Selecting the cycle
The programme table shows you the pro-
gramme that is suitable for your laundry.
– To power on the unit, turn the cycle se-
lector (2) to the desired programme.
The display in the control panel (3)
shows the settings of the selected pro-
gramme.
Starting the cycle
1. Ensure that the appliance door (22) is
closed.
2. Touch the Start/Pause button (11).
The display (4) shows the remaining
running time of the programme.
Cancelling the current
programme
CAUTION
Risk of burns!
The appliance door may become hot dur-
ing operation.
n
Do not touch the appliance door dur-
ing operation.
CAUTION
Risk of scalding!
Improper handling of the appliance can
lead to scalding caused by hot suds.
n
Never open the appliance door with
force.
– To cancel the current cycle, touch the
"Start/Pause" button (11) briefly.
The appliance stops washing and the
programme is cancelled.
When you rotate the cycle selector to
any programme position, the residual
water is pumped out and the programme
is cancelled.
You can choose a new programme after
pumping and start it with the Start/Pause
button (11).
Suspend, reload and resume
programme run
1. To interrupt a cycle to reload laundry,
touch the Start/Pause button (11) for 3
seconds.
2. Wait until the laundry drum stops rotat-
ing.
3. Open the door and reload the laundry.
If the water level or temperature is very
high, the door remains locked and can-
not be opened.
4. Close the door.
5. To resume the cycle, touch the Start/
Pause button again.
Cycle end
The appliance stops automatically as soon
as the selected cycle is finished.
The appliance beeps. “End” appears on the
display.
1. Open the appliance door (22) and re-
move the laundry.
2. Leave the appliance door open to allow
the inside of the appliance to dry.
3. Turn the tap off.
Bekijk gratis de handleiding van Hanseatic HWMM5714A3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMM5714A3 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 9510 MB |
