Hanseatic HWMM1814A2 handleiding
Handleiding
Je bekijkt pagina 65 van 96
Set-up, connection and initial start-up Page EN-15
3. Within the following 10 seconds: Simul-
taneously touch and hold the Boost (7)
and Temperature (11) buttons for about
3 seconds until the display (4) shows
"t19".
4. Touch the start/pause button (6) until
the display shows "0".
– The display then shows the spin speed
in real time.
When the calibration is complete, the
display shows "PAS".
– If the display shows “FAL" instead, the
calibration has failed. Check if there are
any objects in the drum and restart the
calibration.
5. After successful calibration, please
press the On/Off button to turn off the
appliance. The calibration procedure
now is finished.
Commissioning and test run
The appliance requires an initial wash cycle
without laundry, but with detergent. The
aim of this is to rinse out possible residues
from production.
1. Fill the main laundry compartment (25)
with a maximum of 25 ml of compact
detergent.
2. Make sure that the drum is empty.
3. Press the appliance door (19) firmly
closed.
4. Proceed as described in the section
"Standard cycles", using the "Cotton"
programme.
First use is completed once the cycle has
finished.
Bekijk gratis de handleiding van Hanseatic HWMM1814A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMM1814A2 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10324 MB |
