Hanseatic HWMK814A1 handleiding
Handleiding
Je bekijkt pagina 75 van 96
Page EN-27
Cycle adjustments
Additional functions can be used to change
a cycle’s standard values and adjust them
to your laundry in order to achieve the best
possible washing result or maximum effec-
tiveness.
The setting options available to you depend
on the selected cycle (see ‘Cycle adjust-
ments’ table).
If touching the respective key has no effect,
none of the additional functions are available.
Changing the washing water
temperature
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(11)
Temp/
Temp/
Temp/
After selecting the desired cycle, its standard
temperature will be shown on the display (3).
The setting influences the cycle time and the
energy consumption.
• To change the washing water tempera-
ture, repeatedly press the ‘Temp
’ but-
ton (11) until the desired temperature is
shown on the display (
0
stands for ‘tap
water temperature’).
You can now select further additional
functions or start the cycle.
Changing spin speed
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(10)
After selecting the desired cycle, its standard
spin speed will be shown on the display (3).
The spin speed affects the noise emissions
of the appliance and the residual dampness
of the laundry. The higher the spin speed, the
higher the noise emissions and the lower the
residual dampness.
• To change the spin speed, repeatedly
press the ‘U/Min/
press the ‘U/Min/
’ button (10) until the
desired spin speed is shown on the dis-
play (
0
stands for ‘drain without spinning’).
You can now select further additional
functions or start the cycle.
Pre-washes/Additional rinses
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(19) (20)
After selecting your preferred cycle, you can
add two functions to the cycle:
‘Pre-wash’ (20)
This option is only recommended
for heavily soiled laundry (see “Fill
with your chosen detergent or care
product”).
‘Extra rinse’ (19)
Cycle adjustments
Bekijk gratis de handleiding van Hanseatic HWMK814A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMK814A1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10800 MB |
