Hanseatic HWMK814A1 handleiding
Handleiding
Je bekijkt pagina 59 van 96
Page EN-11
Delivery
Installation, connection and
first use
Removing the transport safety
devices
WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or even death.
■ Make sure the appliance is not con-
nected to the power supply whilst the
transport safety devices are being re-
moved or installed.
There are four transport safety devices (29)
on the back of the device. These must be re-
moved before first use.
(29)
1. Loosen the screws of the transport safety
devices (29) using a 10 mm wrench.
(29)
2. Remove the transport safety devices (29).
(38)
3. Close the openings with the covers (38)
supplied.
4. Keep the transport safety devices in a
safe place. Re-install the transport safe-
ty devices every time the appliance is
moved - when moving home or returning
the appliance!
(40)
5. Carefully tip the appliance on its side
and make sure that the styrofoam pad-
ding (40) is also removed. If it is still lo-
cated in the recess in the bottom of the
appliance, remove it.
Installation site
• Place the appliance in a frost-proof,
well-ventilated room.
• Place the appliance on a surface that is
not exposed to direct sunlight.
• Place the appliance far away from heat-
ers that burn oil or coal.
• Place the appliance in a place where
there is a bathtub or sink.
Bekijk gratis de handleiding van Hanseatic HWMK814A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMK814A1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10800 MB |
