Hanseatic HWMK714A1 handleiding
Handleiding
Je bekijkt pagina 78 van 96
Page EN-30 Other additional functions
Start time pre-selection
The cycle usually starts as soon as you have
pressed the button (6). This appliance also
offers you the option to delay the start time.
Setting the start time preselection
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(13)
The start time delay can be set in one-hour
increments. The maximum start time pre-se-
lection is 24 hours.
1. Select the desired cycle using the cycle
selector (2).
2. Press the ‘Startzeit-Vorwahl’ button (13).
The display (3) shows the indicator
(16)
and the delay time
1 h
, i.e. the selected
cycle will start in one hour.
3. To extend the delay time, repeatedly
press the ‘Start time pre-selection’ button
until the display shows the desired delay
time.
4. Press the
button (6).
The cycle will start after the delay setting
has elapsed.
Terminate delay
• If you have already pressed the (6) but-
ton, switch the appliance off with the
button (5).
• If you have not yet pressed the button,
press the ‘Start time pre-selection’ but-
ton (13) repeatedly until the display (3)
shows
0 h
.
Button lock (child lock)
The button lock allows you to secure the
appliance from unwanted use. This stops a
standard cycle from being altered when not
desired and from being accidentally started
or stopped.
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(10) (9)
• To activate the button lock, simultane-
ously press and hold the two buttons
‘U/Min/
‘U/Min/
’ (10) and ‘Funktion’ (9) until
ously press and hold the two buttons
(22)
appears in the display (3).
All operating controls are locked (excep-
tion: (5) button).
• To switch off the button lock, press and
hold the two buttons ‘U/Min/
hold the two buttons ‘U/Min/
’ and ‘Funk-
tion’ simultaneously until the indicator in
the display goes out.
Switching the signal tones on
and off
Verschmutzungs-
grad
Verschmutzungs-
grad
Verschmutzungs-
Ein/Aus
Start/Pause
3 Sek. drücken für Individuell/Signal
3 Sek. Tür
Entriegelung
Startzeit
-Vorwahl
Zeit
sparen
Temp/
U/Min/
Funktion
(11)
You can decide whether or not there should
be a beep when a button is pressed and
when the cycle ends.
• To change the current setting, press the
‘Temp/
‘Temp/
’ button for 3 seconds. (11).
Other additional functions
Bekijk gratis de handleiding van Hanseatic HWMK714A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMK714A1 |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10800 MB |
