Hanseatic HWMA714ABI handleiding
Handleiding
Je bekijkt pagina 66 van 86
Page EN-22 Standard cycles
Standard cycles
Before getting started
– Read the “Intended use” and “Safety in-
structions” chapters first.
– Remove the transport safety devices
and prepare the appliance as described
in the chapter “Set-up, connection and
initial start-up”.
– Fit the water inlet hose (26) and the wa-
ter outlet hose (14) correctly.
– Open the tap completely.
Selecting the cycle
The programme table shows you the pro-
gramme that is suitable for your laundry.
– To power on the appliance, turn the
cycle selector (2) to the desired pro-
gramme.
The display in the control panel (3)
shows the settings of the selected pro-
gramme.
Starting the cycle
1. Ensure that the appliance door (19) is
closed.
2. Touch the Start/Pause button (8).
The display (4) shows the remaining
running time of the programme.
Interrupting and continuing the
cycle
– To interrupt a cycle, touch the Start/
Pause button (8).
During the interruption, ":" lights up con-
tinuously in the display (4).
– To resume a cycle, touch the Start/
Pause button again.
We recommend only interrupting the
cycle for a brief period. Otherwise,
the suds will cool down and this will
negatively impact the washing res-
ult.
Cancelling the current
programme
CAUTION
Risk of burns!
The appliance door may become hot dur-
ing operation.
n
Do not touch the appliance door dur-
ing operation.
CAUTION
Risk of scalding!
Improper handling of the appliance can
lead to scalding caused by hot suds.
n
Never open the appliance door with
force.
– To cancel the running programme, turn
the cycle selector (2) to the “OFF” posi-
tion.
The washing cycle and the programme
are cancelled. If you then turn the cycle
selector to any position, the residual wa-
ter is pumped out.
You can choose a new programme after
pumping and start it with the Start/Pause
button (8).
Cycle end
The appliance stops automatically as soon
as the selected cycle is finished. “End” ap-
pears on the display.
1. Open the appliance door (19) and re-
move the laundry.
2. Leave the appliance door open to allow
the inside of the appliance to dry.
3. Rotate the cycle selector (2) to the
“OFF” position.
4. Turn the tap off.
5. Remove the mains plug from the
socket.
Bekijk gratis de handleiding van Hanseatic HWMA714ABI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWMA714ABI |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 9670 MB |
