Hanseatic HWDK86AD handleiding
Handleiding
Je bekijkt pagina 72 van 95
Page EN-22 Washing/drying process
will pump the suds out so that the appli-
ance door can be released.
3. Open the appliance door, add laundry and
then close the appliance door.
4. Press the
button (4) in order to contin-
ue the cycle.
Cancelling/modifying a cycle
Baby Comfort
(1)
(3)
(4)
1. Press the button (3) to cancel or modi-
fy an active cycle.
The washer-dryer will switch off.
2. Press the button (3) again in order to
switch the washer-dryer back on.
3. Use the cycle selector (1) to select any
cycle and then add detergent if required.
4. Start the new cycle with the button (4).
Cycle end
The appliance stops automatically as soon as
the selected cycle is finished.
You will hear a signal tone and the display (5)
will show
End
.
When the locking time ends, the signal
will
go out.
The appliance door will be released with a
click and you can remove the laundry.
1. Leave the appliance door open between
cycles and pull the dispensing drawer (6)
out slightly to allow the inside of the appli-
ance to dry.
If no further settings are made, the ap-
pliance will automatically switch off after
10 minutes.
2. Press the
button (3) to switch off the
appliance.
3. Turn off the valve and take the mains plug
out of the socket.
The spin speed aff ects the noise emis-
sions of the appliance and the resid-
ual dampness of the laundry. The higher the
spin speed, the higher the noise emissions
and the lower the residual dampness.
Bekijk gratis de handleiding van Hanseatic HWDK86AD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HWDK86AD |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 9788 MB |
