Hanseatic HGU6082A147931ES handleiding
Handleiding
Je bekijkt pagina 79 van 84
Page EN-37
Troubleshooting table
Problem Possible cause Solution
The display
will
light up although
dishwasher salt has
been added.
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
The water is not
running or it is running
only very slowly.
There is a kink in the inlet
hose.
Arrange the inlet hose properly so
that it is not kinked (please see
„Connecting the inlet hose“ on
page EN-12).
The water tap is not properly
on.
Turn the water tap on completely.
The filters are blocked. Clean the filters (see „Care and
maintenance“ on page EN-34).
The outlet hose is kinked,
has been extended or is
hanging too high up/too low.
Lay out the outlet hose in a proper
manner (see page EN-11).
The appliance is not
sealed.
The appliance door seal is
defective.
Have the appliance door seal
replaced (see „Service“ on page
EN-39).
The outlet hose or the inlet
hose is defective.
Have the defective hose replaced
(see „Service“ on page EN-39).
The appliance can be
switched on/off, but
cannot be operated.
The appliance can be
operated only when the door
is closed.
Close the appliance door.
The dishwashing results are not satisfactory
Problem Possible cause Solution
There are residues or
streaks on the dishes.
The rinse aid is incorrectly
dosed.
Adjust the dispensed dose (see
„Changing the rinse aid dose“ on
page EN-22).
The dishwasher salt is
depleted.
Add dishwasher salt (see „Adding
dishwasher salt“ on page EN-22).
The dishwasher salt is
clumpy.
Stir the dishwasher salt using the
end of a spoon or similar.
Bekijk gratis de handleiding van Hanseatic HGU6082A147931ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HGU6082A147931ES |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9342 MB |
