Hanseatic HGU6082A147931ES handleiding
Handleiding
Je bekijkt pagina 58 van 84
Page EN-16 Delivery
Automatic regeneration
In order to make sure that the water soften-
ing system works, the water softening sys-
tem is automatically regenerated at regular
intervals.
The regeneration process of your appliance
begins with the drying cycle. The water and
energy consumption then increases and
the duration of the programme is extended.
There is no regeneration process in the short
programme.
The frequency of the regeneration process
depends on the selected water hardness:
°dH Setting
Regeneration process
all X programme
sequences
0-5
H1
–
6-11
H2
10
12-17
H3
5
18-22
H4
3
23-34
H5
2
35-55
H6
1
Example ECO Programme: At a water hard-
ness level of
H
3 and under laboratory con-
ditions, the programme runtime increases
by 10 minutes. The energy consumption
increases by 0.06 kWh and the water con-
sumption by 4.0 litres.
Test run
It is recommended that you carry out a test
run before the first dishwasher cycle in order
to remove residues from the manufacturing
process and to ensure that the device is fully
functional.
If no water escapes during the test run and if
there are no unusual noises, the appliance is
ready to use.
Carry out this test run when the dishwasher is
empty and without any dishwasher detergent.
For the procedure, see chapter “Dishwasher
operation”, from page EN-29.
Bekijk gratis de handleiding van Hanseatic HGU6082A147931ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HGU6082A147931ES |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9342 MB |
