Hanseatic HGU6082A147931ES handleiding
Handleiding
Je bekijkt pagina 50 van 84
Page EN-8 Safety
■ Do not touch the dishes, cutlery or the
inside of the appliance immediate
-
ly after the dishwashing programme
has finished.
Fire hazard!
Insufficient ventilation can cause fires.
■ If your appliance has ventilation
grids, never cover them.
■ Do not set up the appliance on car
-
pets or rugs if it has ventilation grids
in the lower section.
NOTICE
Risk of damage to property!
Improper handling of the appliance
may result in damage to the appliance
itself.
■ Only use dishwasher salt which is suit
-
able for dishwashers.
■ Only add dishwasher salt immediate
-
ly before the next main dishwashing
cycle, as dishwasher salt which has
overflowed can damage the seals
and filters of the appliance.
■ Immediately remove any spilt dish
-
washer salt with a damp towel, as
otherwise the stainless steel surface
can be damaged.
■ Ensure that the dishwashing deter
-
gent and rinse aid are suitable for the
appliance.
■ Wipe away rinse aid which has over
-
flowed immediately, as otherwise it
can lead to excessive foaming which
can compromise the results delivered
by the dishwasher.
■ Do not overload the appliance.
■ Position the upper dish rack at the
highest setting if very tall dishes are
in the lower dish rack, as otherwise the
upper spraying arm will be blocked.
The door seals are sensitive to oil and
grease. Oil and grease can damage the
door seals.
■ Do not grease the door seals.
■ Wipe away grease and oil that has
dripped onto the edge of the open
appliance door.
The door seals can be damaged by un
-
suitable cleaning agents.
■ Do not use harsh, aggressive, sol
-
vent-based or abrasive cleaners.
The appliance is designed for a water
pressure of 0.4 to 10bar (0.04 to 1.00
MPa).
■ If the water pressure is higher than
this, install a pressure reducer. If in
doubt, enquire about the water pres
-
sure with the water supply company.
■ Never connect the appliance to the
water tap or the mixing arm of a wa
-
ter heater (continuous flow heater,
pressure-free boiler etc.).
■ Ensure that the inlet hose is not
kinked and is carefully connected.
■ Do not cut through the inlet hose.
It contains electrical components. If
the inlet hose is damaged, have it re
-
paired by a specialist.
■ Do not use old or previously installed
inlet or outlet hoses. Only use the sup
-
plied hoses.
■ The outlet pipe must be of a mini
-
mum diameter of 40 mm so that the
water can be pumped away unhin
-
dered.
Bekijk gratis de handleiding van Hanseatic HGU6082A147931ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HGU6082A147931ES |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9342 MB |
