Handleiding
Je bekijkt pagina 60 van 66
Reversing the door hinges
Page EN-27
If your spatial conditions require it, you can
change the door hinge of the appliance door (3).
However, this will require some manual skills.
Besides the parts included, you will need the
following tools to reverse the door hinges:
– medium-size cross-tip screwdriver
– medium-size slotted screwdriver
– size 8 and 10 spanners as necessary
• Please read through all of the following
steps before starting work.
Removing the appliance door
(16)
(17)
1. Remove the hinge covers (16) and (17).
(19)
(18)
2. Use the cross-tip screwdriver or the 8 mm
spanner to loosen the screws (18) and re-
move the upper hinge (19).
3. Remove the appliance door (3) and set
it aside.
Reversing the door hinges
Fit the upper hinge
1. Tilt the appliance so that you can reach
the lower hinge with the cross-tip screw-
driver or the 8 mm spanner.
(5)
(5)
(20)
(21)
2. Loosen the screws (21) on the lower
hinge (20).
3. Unscrew the right and left screw feet (5)
and remove the lower hinge.
(22)
(23)
4. Detach the hinge pin (22) and the support
foot (23) from the lower hinge.
5. Attach the hinge pin and the support foot
to the adjacent side of the hinge.
(24)
6. Loosen the blind plug (24) on the left side
and reinsert it on the right side.
Bekijk gratis de handleiding van Hanseatic HGS17260CNFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HGS17260CNFI |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 6566 MB |
