Handleiding
Je bekijkt pagina 57 van 82
Page EN-16 Operating the oven
Starting, interrupting and
ending the oven’s operation
You have selected the function and set the
temperature. In order to
• start/continue the operation, tap the sen-
sor
.
The lighting will switch on; the oven will
heat up. During the heating process, the
temperature display will flash. Up to eight
bars below the temperature display show
the progress of the heating process.
• interrupt the operation, tap the sensor
again .
The temperature display stops flashing and
the operation is paused.
• turn off the oven early, tap the sensor.
The oven is now in stand-by mode.
The function and temperature can be
changed at any point during the cooking
process. The change will take effect approx.
6 seconds after the last sensor operation.
If the door is opened during the function oper-
ation, the operation will be paused
.
Quick pre-heating
The oven offers this additional function in or-
der to speed up the pre-heating process (ex-
ceptions: Functions
, , ).
• Select a function and a temperature, as
described above, and tap the sensor
.
The pre-heating symbol will also appear
in the display. The oven will begin to heat.
Once the pre-set temperature has been
reached, you will hear a signal tone.
Setting the cooking time
You can select a cooking time of up to 9 hours.
The cooking time can be set in the range of
– up to 30 minutes in 1 minute steps.
– from 30 minutes in 5 minute steps.
1. Select a function and a temperature, as
described above.
2. Tap the
sensor.
On the left, next to the temperature, the
display will flash ‘
00:00
hr’.
Bekijk gratis de handleiding van Hanseatic HBO7213PA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | HBO7213PA1 |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 8857 MB |
