Hanseatic GU HBW 324 handleiding
Handleiding
Je bekijkt pagina 56 van 84
Page EN-12 Set-up, connection and initial start-up
90°
600 mm
820–870 mm
100 mm
570 mm
80 mm
90°
Area for inflow/
Outflow and electrical
connection.
– Only install the dishwasher underneath
a continuous worktop which is joined to
the cabinets adjacent to the dishwasher.
– Maintain sufficient distance from the
walls and adjacent appliances. The
measurements of the recess must at
least correspond to the details in the dia-
gram above.
Preparing the appliance
1. Switch the fuse off.
2. Remove cardboard, polystyrene and
adhesive strips from the inside of the
appliance, if you have not already done
so.
Placing the appliance in the niche
1. Make sure that the inlet hose (29), the
outlet hose (27) and the mains cord
with the mains plug (28) are routed cor-
rectly.
(f)
2. Attach 4 mounting brackets (f) to both
sides of the appliance with the pre-as-
sembled screws in order to screw the
appliance to the side kitchen cabinets
later.
3. Push the appliance into the niche.
Aligning the appliance
The two front adjustable feet and the back
footcan be adjusted by up to 50mm to
level the appliance.
The front adjustable feet are equipped with
slots.
You can adjust the height of the rear ad-
justable foot with the centre adjusting
screw.
Bekijk gratis de handleiding van Hanseatic GU HBW 324, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hanseatic |
| Model | GU HBW 324 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 9834 MB |
