Hanseatic 5022IE2.323eEHiTaDJW Handleiding (84 Pagina's)

Handleiding

The timer

Page EN-27

The timer

Setting/changing the time

Setting the time

During initial commissioning or after a pow-

er failure, the display flashes ‘ ’. This in-

dicates that the time must be set. To do so,

proceed as follows:

1. Press the ‘OK’ button once.

The display shows the symbol “ “, the dot

underneath flashes.

2. Set the time using the arrow buttons “<“

or ”>”.

Shortly after the last keystroke, the dot

stops flashing. The time is now saved.

Changing the time

This is necessary e.g. when changing to and

from summer time.

Requirements:

– The timer switch must not be in automatic

mode and

– the countdown timer must not be active.

1. Press the two arrow keys ‘<’ and ‘>’ simul-

taneously.

The dot beneath the symbol “ “ flashes.

2. Set the time using the arrow buttons “<“

or ”>”.

To quickly go forwards/backwards,

hold the corresponding button down.

Semi-automatic and fully

automatic operation

WARNING

Please ensure that you always observe

the following when using the automat-

ic timer:

■ Please make sure to inform all mem-

bers of the household so that they do

not put anything in the oven.

■ Monitor the oven in order to prevent

spills and burning.

■ Take special care when roasting: Fat,

oil and alcohol can ignite.

■ Never leave anything to grill unat-

tended when using the timer!

■ The timer does not control the switch-

ing on and off of the hob.

■ After use, set the function selector

and the temperature controller to

»0«.

■ All settings will be deleted in the case

of a power failure.

The correctly set time is a prerequisite.

– You can pre-programme up to 23 hours

and 59 minutes in advance.

– The cooking time can be set between 1

minute and 10 hours.

– Any programming will be deleted in the

case of a power failure.

– A tone sounds to signal the end of the pro-

gramme, which you can cancel by pressing

any button.

Bekijk gratis de handleiding van Hanseatic 5022IE2.323eEHiTaDJW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.