Hansa WHG714SD1W handleiding
Handleiding
Je bekijkt pagina 9 van 36
SAFETY AND GERMENT CARE LABELS
9
When relocating the washing machine, refrain from lifting
it by the knobs or detergent drawer. Instead, lift it using the
countertop or top cover. During transport, avoid resting the
door on the trolley.
To prevent potential interior damage during transportation,
the washing machine comes with transport bolts. These
bolts must be removed before operating the appliance. Af-
ter removal, cover the holes with the provided plastic caps.
Follow the local water company's regulations while con-
necting the water supply hoses to the water tap.
Utilize only the new water supply hoses provided with the
washing machine for this purpose. Do not reuse old water
supply hoses.
Ensure that the supply water pressure falls within the range
of 0.03-1MPa
To facilitate disconnection from the power source, the
washing machine should be plugged into an easily acces-
sible power socket. This can be achieved by using a plug or
an omnipolar switch, following wiring guidelines. Adhere to
national electrical safety standards to properly ground the
washing machine.
After installing the washing machine, the power socket
must be easily accessible.
When heating water, keep in mind that the washing ma-
chine's maximum current consumption is 10A. Thus, con-
firm that the power supply system (including voltage, cur-
rent, and cable) can accommodate the load.
Bekijk gratis de handleiding van Hansa WHG714SD1W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hansa |
| Model | WHG714SD1W |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3222 MB |
