Hansa WHG714DD1LG handleiding
Handleiding
Je bekijkt pagina 19 van 36
DISPLAY AND CONTROL PANEL
When you select Time Remaining, the display will show time remaining until the
end of the programme 0H, 1H, 2H... up to a maximum of 24 hours. With this option
you can select the time remaining until the end of the wash cycle and the washing
machine will then adjust the entire wash cycle to t within the user-dened time.
Press the Time Remaining button to set the wash cycle end time in one-hour
increments up to a maximum of 24 hours. Once you've chosen the desired washing
programme but before you press the START/PAUSE button, use the Time Remaining
button to display when you prefer the wash cycle to complete, for example in 8
hours.
NOTE: The entire wash cycle duration will be completed before the set end time
elapses.
Here is an example: Wash cycle duration of 1 hour and 30 minutes with end time
delay of 8 hours.
8 hours are displayed and approximately 6 hours 30 minutes is counted down until
the start of the washing programme (which will take 1 hour 30 minutes), then the
programme duration of 1:30 is displayed when the wash cycle starts. Total time is
about 8 hours.
How to cancel the function:
Turn the washing programme selector knob to reset the washing programme.
NOTE:
The Time Remaining function cannot be set for some washing programmes (see
programme table).
The washing programme end time may dier from the actual time depending on
the water supply pressure, drain, type of clothes, water temperature and other
conditions.
6
Time Remaining
Press to set the Auto One Touch washing programme.
The Auto One Touch washing programme is designed to intelligently detect the
laundry weight and adapt the time and temperature accordingly, providing a smart
washing experience.
You can initiate this program using any of the following three methods:
When the washing machine is powered o, press and hold the Auto One Touch
button for a minimum of 3 seconds. The washing machine will immediately initiate
the Auto One Touch washing programme, and the Auto One Touch indicator will
illuminate.
When the washing machine is on, press and hold the Auto One Touch button for a
minimum of 3 seconds. The washing machine will immediately initiate the Auto One
Touch washing programme, and the Auto One Touch indicator will illuminate.
When the washing machine is on, briey press the Auto One Touch button, and the
Auto One Touch indicator will illuminate. Next, press the START/PAUSE button to
commence the Auto One Touch washing programme on the washing machine.
7
Auto OneTouch
19
Bekijk gratis de handleiding van Hansa WHG714DD1LG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hansa |
| Model | WHG714DD1LG |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 3222 MB |
