Hammer RapidCharge Duo 20W handleiding
Handleiding
Je bekijkt pagina 6 van 20
EN © 2024 HAMMER. All rights reserved RapidCharge Duo
6
Material
PC fireproof material
Compatibility
PPS, PD3.0, QC4+, QC3.0, QC2.0, SCP, FCP, AFC, etc
Dimensions
36 x 32 x 83.8 mm
Weight
56.5g
Arrangement of components in the charger
1. USB-A socket
2. USB-C socket
3. Pins
4. Housing
Operation of a charger
Plug the charger into the socket.
Connect the device or devices you wish to charge or use the cable of the
charger sockets and the device. If the device might use one of the popular quick
charge modes (PPS, PD3.0, QC4+, QC3.0, QC2.0, SCP, FCP, AFC, etc.) use the
red socket.
Do not use excessive force for it can cause damage to the device or supply socket.
When charging is complete, disconnect the device or USB cable from the
charger and disconnect the charger from the socket.
Disconnect an unused charger from power grid. If the charger is damaged, do not
repair it, replace it with a new charger.
Troubleshooting
In case of any problems with the device, please refer to the following tips.
Despite connection,
the charger does not
charge the device
Check whether the socket to which the charger is
connected; is not damaged or whether the fuse
protecting the socket has not burned. If you are using
an extension cord or surge protection strip, make sure
that the socket to which the charger is connected is
turned on. Check if the (USB/Type-C) wire is not
Bekijk gratis de handleiding van Hammer RapidCharge Duo 20W, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Hammer |
| Model | RapidCharge Duo 20W |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3196 MB |
