Hama 176592 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 6 van 32

4.2 Fitting the adapter

• Thanks to the union nut, the thermostat can be tted to all valves with the thread dimensions M30 x 1.5 mm

from the most common brands such as Heimeier, MNG, Junkers, Landis+Gyr (Duodyr), Honeywell-Braukmann,

Oventrop, Schlösser, Comap, Valf Sanayii, Mertik Maxitrol, Watts, Wingenroth (Wiroex), R.B.M, Tiemme,

Jaga, Siemens and Idmar.

• With the adapters included in the extent of delivery, the device can also be tted to radiator valves of type

Danfoss RA, Danfoss RAV, Cale and Giacomini.

To t the attachments, please follow the instructions below for the respective part.

Danfoss RA and Danfoss RAV

• While tting, ensure that the pins inside the adapter cover the same position as the notches on the valve.

• Fully attach the adapter appropriate for your valve.

• During tting, you may need to use a screwdriver and bend the adapter slightly in the area of the screw

bushing. This will enable the adapter to be pushed more easily onto the valve. After locking it onto the body

of the valve, secure the adapter using the enclosed screw and nut.

Danfoss RAV

• On Danfoss RAV valves, the tappet extension must be placed on the valve pin before tting.

Cale

• Please place the Cale adapter directly on the valve.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Hama 176592, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Thermostaat