Hama 176592 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 13 van 32

Child safety

• Press and hold the control dial (1) for approximately 5 seconds to activate the child safety function.

• "LC" appears in the display.

• Child safety can be disabled by pressing the control dial for 5 seconds.

Temperature change during an operational heating program

• When a heating program is active, the temperature can be changed manually by turning the control dial.

• ashes briey on the display. The manual change of temperature remains active until the next change of

program mode.

• If the program mode then becomes active, the manual temperature is overridden.

• If no

appears, the thermostat is in manual mode.

• To immediately return the radiator thermostat to the temperature set in the heating program, press twice on

the control dial while the display is lit up.

• The temperature shown in the display returns to the original value.

• The display shows

.

On/Off

• If the temperature is set at <5°C, "OF" appears in the display.

• If the temperature is set at >30°C, "ON" appears in the display.

• If the thermostat has a wireless connection to the central control unit, this is shown in the display

• The thermostat has two modes. Programming mode is indicated in the display by

.

If the thermostat is in manual mode, no

appears.

Alarm

• If an error occurs in the sensor, "Er" appears in the display.

Low battery alarm

Note - Low battery status

• If the battery voltage is low, the

symbol appears in the controller display.

• The app noties the user about the low battery level via a push message.

• If the battery voltage is very low, the

symbol on the controller display starts ashing.

• For frost protection reasons, the controller opens the valve 100%. The Wi-Fi connection is interrupted.

New version (V2/V3)

• For frost protection reasons, the controller opens the valve 30%. The Wi-Fi connection is interrupted.

• The valve can still be manually set to 0% (OF) or 100% (ON) on the controller.

• Once a low battery voltage is reached, it is strongly recommended that the batteries are

replaced to ensure smooth operation.

•Change the batteries as described in Section 4.1 Inserting / changing the batteries.

Outward mode

• Outward mode can be activated in the app. As soon as this is activated, "LH" appears on the display.

• If this mode is active, the set temperature is automatically dialled down to 16°

Display turning

• First move the dial to the OF position. Then, by pressing the control dial 5 times, the display can be rotated

around 180°.

Note - Pairing restart

Restarting the central control unit

• Press and hold the button on the central control unit for around 5 seconds. As soon as the LEDs start to

ash, you can, as described in Section 4.6 Integrating devices into the Hama Smart Home App, start

a further pairing attempt.

Thermostat restart

• Press and hold the control dial on the radiator thermostat for around 5 seconds until "- -" appears on the

LED display. Ensure that the thermostat previously displayed "OF".

• You can now, as described in Section 4.6 Integrating devices into the Hama Smart Home App, start a

further pairing attempt.

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Hama 176592, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Thermostaat