Haier XF 5C7M0W-80 handleiding
Handleiding
Je bekijkt pagina 38 van 52
38
If you press any button (except the
ON/OFF – ENROLMENT Wi-Fi – DELAY
START
- START” buttons for 3 seconds,
the programme name "P XX NAME" is
displayed (P + programme number +
programme name) for one single scroll
and then the delay time is displayed
again.
If you want to cancel the delayed start
proceed as follows:
Open the door.
Press and hold the "START/RESET"
button for at least 3 seconds. The display
will show "RESET" and beeps will sound.
The delayed start and the selected
programme will be cancelled. The name
of the programme will appear on the
display.
At this point, if you want to start the
dishwasher, you will need to set the
desired programme again and select the
option buttons, if necessary.
WARNING LIGHTS ON
THE DISPLAY
When the "SALT" message appears on the
display or, where present, the relative light
comes on
, fill the tank (see chapter
"ADDING THE SALT").
When the "RINSE AID" message appears
on the display or, where present, the
relative light comes on
, fill the tank
(see chapter "ADDING RINSE AID").
Indicates any fault in the inflow of water
between the tap and the dishwasher (see
"TROUBLESHOOTING AND WARRANTY"
).
DISHWASHER FUNCTIONS
DEMO MODE ACTIVATION
1. To start the DEMO MODE, press the
"ON/OFF"
and "HALF LOAD"
buttons simultaneously for 10
seconds.
2. The "DEMO ON" message will scroll
twice on the display.
3. Now the machine is ready for simulating
various programmes and options.
ALWAYS start the procedure with the
dishwasher turned off.
Activation or exclusion of the
DEMO MODE programme:
(Demonstration programme to
be used exclusively in points of
sale)
WATER SUPPLY CLOSED
INDICATOR LIGHT
If the RINSE AID level is set to 0, this
will never happen.
"NO RINSE AID" warning light
If the softener level is set to 0, this will
never happen (see chapter on setting
the softener).
"NO SALT" warning light
In the event of a power failure or
shutdown, the dishwasher stores the
time remaining before starting, which
will be resumed at the point where it
was interrupted as soon as the power
supply is restored or the machine is
switched on again.
Bekijk gratis de handleiding van Haier XF 5C7M0W-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | XF 5C7M0W-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6847 MB |
