Haier XF 5C7M0W-80 handleiding
Handleiding
Je bekijkt pagina 30 van 52
30
If you want to cancel and change a
programme that is already in progress,
proceed as follows:
1. Open the door.
2. Press and hold the "START/RESET"
button for at least 3 seconds.
3. The countdown appears on the display
"3 -2 -1" while the "RESET" button is
held down.
4. "RESET" will appear on the display and
beeps will sound.
5. The programme in progress will be
cancelled and the "ECO" programme,
or the programme you have decided to
use, appears on the display,
memorising it when the dishwasher is
switched on.
6. At this point you can set a new
programme.
While the programme is running, the display
shows the time remaining at the end of the
cycle and the name of the set programme
by pressing any button Furthermore, the
external display provides the washing
phases in which the programme is located.
- WASH
- RINSE
- DRY
The PART LIGHT will indicate the
progression of the wash, the bar goes out
gradually as the washing is nearing the end.
If there is any break in the power supply
while the dishwasher is operating, a
special memory stores the selected
programme and, when the power is
restored, it continues where it left off.
The end of the programme will be indicated
by 3 signals lasting 3 seconds, interspersed
with a pause of 20 seconds, after one
minute the dishwasher will switch off. At the
same time the word "END" will appear on
the display for one minute.
The word "END" will appear on the external
display.
The BAR LIGHT will indicate the end of
programme with a sequence of lights.
For models with the AUTO DOOR
option only, the door will open
automatically during the drying phase
and you must wait for the end-of-
cycle
signal before removing the dishes.
End of the programme
FREESTANDING
Programme operations
FREESTANDING
WARNING:
Before starting a new programme, you
should check that there is still
detergent in the dispenser. If
necessary, top up the detergent.
Changing a running programme
Bekijk gratis de handleiding van Haier XF 5C7M0W-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | XF 5C7M0W-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6847 MB |
