Haier XF 4A4M0X-80 handleiding
Handleiding
Je bekijkt pagina 6 van 52
6
Follow the instructions supplied
with the product.
In case of breakage, the hose
must be replaced with an
original spare part available
from the manufacturer or its
service center.
WARNING:
Use only the inlet hose
supplied with the appliance
for connection to the water
mains. Old inlet hoses must
not be reused.
Replacement of the inlet hose
WARNING:
Ensure that the product,
before being switched on for
the first time, is installed in a
horizontal position by way of
the adjustable feet.
Check the horizontal position
using a spirit level
WARNING:
(only freestanding models)
If it is necessary to remove
the worktop to install the
dishwasher in a compartment
of a modular kitchen, please
contact our Authorized
Technical Assistance Centres.
WARNING:
(only built-
in and half
integrated models)
Do not connect the dishwasher
to the mains supply until the
front panel has been fully
installed. Otherwise, the risk
of an electrical hazard
may
persist.
WARNING:
(only built-in and semi-
integrated models)
Do not connect the dishwasher
to the mains supply until all
installation operations have
been performed according
to the "TECHNICAL NOTES
FOR INSTALLATION" supplied
with the product.
Bekijk gratis de handleiding van Haier XF 4A4M0X-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Haier |
| Model | XF 4A4M0X-80 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 6807 MB |
