Haier X Series 11 HWD120-BD16397 handleiding

Wasmachine

Haier

40 pagina's

PDF beschikbaar

Handleiding

Note: Wi-Fi Network

It is not possible to connect the appliance to a public Wi-Fi network. It may cause

malfunction.

Note: Use same Wi-Fi

Connect with your smartphone to the network you want to connect the product to.

Note: Remote control expiration

Once the remote control is activated, if the end user doesn’t start any cycle from app in

10 minutes, the appliance will go to Networked Delay Standby Mode, and keeps remote

control up to 24 hours, then shut oﬀ .

7.5 Enable Remote Control

1. Check that the router is switched on and connected to the Internet.

2. Load the laundry and close the door.

3. Press the “ ” button, the door locks.

7.4 Registration and App Pairing

1. Connect the smartphone to the home Wi-Fi network you want to connect the product to.

2. Open the App.

3. Create the user proﬁle (or log-in if it is already created previously).

4. Pairing the appliance following the instructions on the App.

Start the cycle using the app, control panel will be disabled except for “Power” and

“Start/Pause” button.

. The Remote Control can be also activated by pressing " " but

on durying the cycle running.

. Once the cycle has been completed, the doo

r unlocks and the re

mote control turns oﬀ .

7. After 2 minutes the appliance goes to oﬀ mode.

7.6 Disable Remote Control

1. To exit remote control while a cycle is running, press “" ” "button on the control

panel. The appliance will keep running the cycle and go to read only mode;

2. To resume the Remote Control by pressing the " ” button again.

3. Control the appliance using the App.

1. At the end of the cycle, the door will unlock and the remote control will deactivate.

2. After 2 minutes the appliance will automatically switch oﬀ .

7-hOn

7.7 End of Cycle With Remote Control On

Bekijk gratis de handleiding van Haier X Series 11 HWD120-BD16397, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.