Haier X Series 11 HWD120-BD16397 handleiding

Wasmachine

Haier

40 pagina's

PDF beschikbaar

Handleiding

tton

ca re

3.9 Detergent drawer

3-26

be seen(Fig.3-26).

Compartment for softener.

3: The compartment of powder detergent.

and "Dry“at the same time,it will display the number of running cycles for 3 seconds,

and then back to standby interface.The cumulativer running cycles will add 1 after

the programme ends.The running cycles will be displayed in hexade-cimal if it is

over 9999.

Note: Factory settings

If there is no special requirement default settings are recommended.

Temp. "

3.8 Self clean

This program is used to clean the inner and outer cylinders of washing machines, and

different cleaning modes can be selected in different usage scenarios.

1. Fluff cleaning mode: Select the "Self-clean" program, touch the "Temp." button,

set the temperature to "--" (no heating), and display the running time "0:08", start the

program. During the use of the washing machine, dandruff may accumulate inside

the machine. Running this mode can effectively remove dandruff. Please do not add

any detergent and ensure that there is no clothing inside the cylinder.

2. Cylinder self-cleaning mode: Select the "Self-clean" program, touch the "Temp."

button, set the temperature to "90 ° C", display the running time of "1:00", and start

the program. This mode can effectively remove residual stains on the cylinder wall

through high-temperature cleaning. Do not add any detergent and ensure that there

are no clothes inside the cylinder.

Bekijk gratis de handleiding van Haier X Series 11 HWD120-BD16397, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.